Weighing table　to maintain balance

1) The scale of weighing table around the space inside the card may not have the stone, coal, and other foreign bodies.

2) carry out regular checks of whether a reasonable space limit, limit and bolt-scale collision should contact.

3) to connect pieces of half-yearly maintenance, support head painted butter.

4) prohibit the scales on the stage for arc welding operations, if necessary scale in Taiwan for arc welding operations. Please note the following: (disconnect signal cables and weighing display controller connections; arc of the earth must be set up in the vicinity of the welding parts, and a solid balance in contact with the body; must not use the sensors to an electrical circuit arc welding Part)

Weighing display controller maintenance

1) carry out regular checks of the wiring is loose, broken, whether or not a solid grounding line.

2) long-term weight control do not have to show that when (for example, more than a month) should be based on environmental conditions for electricity inspection so as not to damp or other adverse impact on the reliability of gas erosion.

3) display controller to avoid weighing close to the heat source, the source of vibration.

4) the use of the environment should not be inflammable and explosive gas or dust.

5) show that in weighing the same controller with online access may not inductive load, such as the doorbell, and so on.

6) do not have to weigh the long-term display controller, replacing fuses, mobile or location of the removal of dust and so on, be sure to cut off the power.

7) show that weight control, such as power failure should prompt, and then notify the department of professional staff to inspect and finishing, the user can not open the box at random, but are not free to replace the internal parts.

8) and the Secretary-pound instrument maintenance, through specialized training of staff to be able to engage in the operation and maintenance.

Sensor replacement

1) open sensor (damaged) the top of the plate, lifting jack scales from Taiwan, off ground sensors.

2) open the junction box will damage the sensor cables and junction box free. In the out-side sensor cable. NOTE: In the line drawn, lead accompanied by a body through scales, in order to replace the new sensor, the cable will cross the line into the junction box-scale.

3) The second in the light of the above-mentioned methods will be weighing sensor cable through the body into the junction box.

4) in accordance with the cable wiring diagram to the core fixed-line connection in the box corresponding to the post.

5) Jack let go and let Taiwan-scale, covered with plate.

6) to replace the sensor, to be re-set the value of the car and correction.

7) after the installation of sensors, the excess cable should be created to place a bundle may not be placed directly on the basis of the ground.

8) In order to ensure consistency and interchangeability of sensors, sensor cables may not arbitrarily cut off.

9) and the installation of the demolition process must not appear scratch, bump sensors, and to protect the cable

Computer maintenance

1) to ensure that computer systems a good grounding.

2) is strictly prohibited frequent switches, moving freely and the demolition of a computer.

3) a computer to stay away from water sources, strong electromagnetic do together.

4) prohibit the use of arbitrary external floppy disk to prevent HIV infection.

5) is strictly prohibited percussion keyboard with a hard object, such as screwdriver.

6) the engine room should be kept clean, the temperature should be in line with the requirements of the host statement.

7) operators to be trained before induction.

Maintenance

1) Weighing installation, the statement should be properly preserved, certificate, the Figure, such as installation, and the measurement of the local department or a recognized national metrology department after passing the test before use.

2) power systems, power to check the reliability of the grounding device; from work after the shutdown, we must cut off the power.

3) the use of weighing scales before checking whether the body flexible, supporting all parts of the performance is good.

4) show that the controller must start weighing warm-up, generally 30 minutes or so.

5) In order to ensure accurate measurement system, there should be anti-lightning facilities, weighing in the vicinity of welding operations, the scale is strictly prohibited by Taiwan for ground zero line, to prevent damage to electrical components.

6) for installation in the wild in the land value, carry out regular checks on the foundation drainage to avoid blockage.

7) To maintain the wiring inside the box dry, once the wiring inside the box and wet air drop immersion, drying hair dryer can be used.

8) In order to ensure the normal measurement scales should be calibrated on a regular basis.

9) measurement lifting heavy objects, there should be no impact on the phenomenon; vehicle weight measurement, the system should not exceed the rated weighing.

10) truck axle load and capacity sensors, sensor point distance, and other factors. General Motor"s largest heng close to the ban on trucks weighing of such short-wheelbase vehicle had value.

11) Secretary-pound operator instruments and the maintenance staff to be familiar with the prospectus and related technical documents in order to post operation.