Type：Truck Scales、Simulative Truck Scales、Digital Truck Scale、Fully Digital Truck Scale

 -Simulative truck scale developed by our company is 4th steel balance body apparatus, which

  adopts cold-bent channel steel in U section and several closely and separately welded cavities.

  The balance platform has high performances in integration steel strength, anti-distortion, and

  resistance of partial pressure. This product is widely used in places such as ports, factories,

  mining areas, goods yards, workshops and warehouses etc..

-This platform adopts mixed structure of  type and U-shape beams to ensure the high intensity

and good rigidity of platform, the safe load of which is over 150%.  Characteristics are given

as follows:

-The cross section of platform consists of several U-shape beams, and longitudinal section

 consists of type beams. Every section of platform has 5-6 U-shape beams with height of 310~340mm

(according to different capacities) and subsidiary beams, which ensure the rigidity of the whole

  platform. Other weighing scale manufacturers choose channel steel as the structure and only two

  main beams exist in platform, which result in short service life and easy distortion

  of platform. 

-There exist three general structures of platform in China: the first generation/large beam type, 

the second one/ group welding of steel boards, and the third/channel steel group welding. All

the above are simple in producing, and the rectangle section of platform by manual group welding

is easily distorted. But KEDA introduced the moulding equipment of U-shape beam and adopted

the U section group welding (the fourth generation), which makes the whole structure and rigidity

of platform more outstanding than other products in China.

-The steel of platform is provided by domestic large and well-known steel plant. The welding

quality is greatly improved by adopting CO2 protection welding. All the lumens inside platform

are completely sealed up, not easy rusty. An under coat of paint is made over the steel plates

after rotoblast. Then is the finish coat used in ship. The thickness of paint is 100 microns,

which is wearable, anti-corrosion, and resistant to press, acid and alkali.

-To ensure platform rigidity, all the scales have to pass strict tests before leaving factory.

All the welding lines of main components are processed by supersonic inspection. The platform

can be launched only after full-load and overload tests. It is the strict technological processes

and tests that ensure the super quality of kEDA product.

-Material and specifications: the faceplate of platform is the hot rolling Q235A steel plate with

thickness of 10 mms; platform slab is the hot rolling Q235A steel plate, with thickness within

8-12 mms; the soleplate, which is the so-called U-shape beam, is the Q235A steel plate with

thickness of 6 mm.

Technical indexes

-Accuracy Class: III     

-Rated capacities: 10,15,20,30,40,50,60,70,80,100 and 120t

-Widths of platform: 2,2.2,2.5,3 and 3.2m

-Lengths of platform: 4,5,6,7,8,9,10,12,14,15,16 and 18m

-Foundation form: no foundation pit and shallow foundation pit

-Counts:≥3000 (note: counts=maximum capacity/division)

-Overload limit: 125%

-Platform operating temp.(including load cell) : -30℃~+65℃

-Operating humidity RH: 20-85%